Outdoor 360 Degree Anti Drone Omni Device System Customized Frequency

• Customization: Available
• Type: Sensor
• Usage: Liquid
• Model NO.: TX010
• Specification: 45*45*24cm
• Trademark: TX
• Origin: Shenzhen
• Production Capacity: 10000PCS/Mouth

Product Description

     Working Principle

-- As you know, the drone is controlled by the ground through the WIFI signal link, usually the signal link is the WIFI 2.4GHz,WIFI 5.8GHz, now some new model 900MHz, 5.2GHz, also navigation positioning signal GPS 1.5GHz.

-- When our drone jammer transmits the suppression signal to interfere their signal link, the drone will be out of ground control, and can not send back the photo and video to the ground;
Also, as drone interfered, the setting mode of drone is to let the drone itself return home immediately in 3 second;
With GPS signal interference too, the drone will be forced to hover or land down;

-- Thus, the drone jammer can prevent the drone enter the protection area, also blocking its SPY photo and video transmission to the ground, or force the drone land down.

 

1. Packing List

1. How to Install

 

1. Choose the optimum position to realize the largest jamming area such as top the building, mountain top, etc. (very important )
2. Prepare an aluminum alloy stand as the photo suggest
3. Weld the jammer cabinet holder to the stand   
4. Use the cement to fix the stand on the position (or use the expansion bolt on the cement floor )                                                                                     
5. Join the OMNI antenna to the jammer cabinet accordingly
6. Join the jammer cabinet in the holder by the following steps: (1)* Take out all screws except the above 2 screws as photo  (2)Hang the jammer on the holder (already on the stand) by those 2 screws                                          * (3)Tighten all the left 6 screws on the holder 7.Use waterproof tape to wrap all the antenna&jammer joint place                                                                 8.Connect the thunder protection box to the cabinet as below suggest: (the thunder protection box instruction is in the package box too The blue and red color wire place can be changed freely for L1 and N1, L)                                                                                                                                                                                                         9.Finished as below photo

Notes:   

1. Plese ensure all the connector is well and right connected
2. Please ensure the antenna is connected right according to the frequency band or it possibly leads to the short wire
3. Please ensure all connector has the waterproof tape outside to prevent the fast oxidation, cause that will influence the jamming effect
4. Please ensure the jammer system is fixed stably on the floor or it is easily blew down by wind

Function

1. It will force the drone return home/hover/force down

once it enter the protection area

1. The drone will be out of the ground control
2. The drone can not send back the reconnaissance photo and video

to the ground when flying  (but the photo and video is still stocked
in the drone )