TX2445 is an information security module dedicated to blocking UAV image transmission/remote control signal transmission. This module has an average output power of 45dBm (30W), sufficient power, good in-band flatness, and upper and lower sideband offsets. Small and other advantages, the product has running indicator LED lights, high-efficiency sweeping interference source with very small temperature drift, stable and reliable power supply through the core capacitor, convenient application and good anti-drone effect of frequency hopping drones.
| 2.4GHz 100W RF Power Amplifier Specification |
| No. |
Item |
Data |
Unit |
Notes |
| 1 |
Frequency |
2400-2500 |
MHZ |
|
| 2 |
Work Temperature |
-20~+70 |
ºC |
|
| 3 |
Max Output Power |
30 |
W |
|
| 4 |
Work Voltage |
DC24 |
V |
|
| 5 |
Max Gain |
45 |
dB |
|
| 6 |
Flatness |
±3 |
dB |
|
| 7 |
Max Current |
3 |
A |
|
| 8 |
Output VSWR |
≤1.5 |
|
|
| 9 |
Output Connector |
SMA/F 50Ω |
|
Customized |
| 10 |
Power Amplifier Efficiency |
45 |
|
when Max Output |
| 11 |
Switch Control |
high low
level current |
V |
0V off /0.6 on |
| 12 |
Standing Wave Protection |
OK |
|
|
| 13 |
Temperature Protection |
75° |
ºC |
|
| 14 |
Size |
134*60*18 |
mm |
|
| 15 |
Weight |
0.2 |
Kg |
|
Precautions for use
- Power supply needs to carry 24V 3A
- If the output power is greater than 5W and above, it is recommended to strengthen the heat dissipation treatment, such as adding a heat sink or adding a fan.
- When connecting, you must first screw on the antenna, then connect the front-end source device, and finally supply power
Audited Supplier 
){kind=link}
){kind=link}